Welcome to GUANGZHOU JIMARK FOOD MACHINERY CO.,LTD!
TEL:+86-20-84850737  Favorite | Sitemap | 中文版
News
Location: Home > News > Text
Rotating furnace maintenance and operating procedures
Edit:   Date: 2017-03-04

Day maintenance content
After the furnace is completely cooled, use warm water with kitchen cleaner to clean the inside of the furnace, glass and appearance. Wipe the process, not with the furnace cleaning agent or any acid and bleach-containing substances, but also absolutely prohibit the use of steel velvet or metal brush, should be soft cloth with clean warm water, and to keep the cloth moist, do not wet to drip that Can, clean all kinds of trolleys in the same way.
For customers who use oil stoves, it is necessary to check the storage of diesel fuel in the tank before use every day to ensure that the machine will not be shut off during use. After the work is finished, clean the oil tank with a cleaner and a soft cloth. [3]
Monthly maintenance content
Clean the water pipe filter, remove the filter after the water and then clean back, and then open the water to check whether there is water leakage
Lubricate the trolley spindle with a butter truck and a caster for a caster, if any damage is found, replace it immediately
Check the chain tension, to push the chain of the middle of the line can be transferred to the distance of 10mm to adjust the base, and to the chain coated with lubricants
Lubricate the upper and lower shafts and door locks with butter to ensure that the door switch is free of sound or inconvenience
Open the dimension valve (for the use of oil furnace customers) to clean the dust around the burner and garbage, and wipe the floor with a damp cloth, and then remove the tank up and down the small filter core, and its cavity with high pressure air spray wash.

Weekly maintenance content
Clean all electrical components and terminals and motor housings, circulating fans and exhaust fan blades with a soft brush and vacuum cleaner
Check and test the control system, test the temperature to ensure that the normal closure, test thermostat and thermal maintenance work is normal.
Check whether the door seal is intact, if damaged, must be replaced to ensure its insulation effect
Such as the furnace pipe plug, you must remove the water pipe, the right side of the inner plate, steam pipe for a comprehensive cleaning, if necessary, replace the water pipes and steam pipe
Check the fluorescent tube for damage
For customers who use oil stoves, a full inspection of the burner should be done every quarter to detect problems in a timely manner, eliminate hidden dangers, commission the burner to the best working condition, and remove carbon deposits from the burner.

Annual maintenance content
In addition to adhere to the above, every year there is a comprehensive maintenance.
The use of electric furnace customers, each year by the professional staff of the various types of motor to do a comprehensive inspection in order to detect problems in time, and the electric tube to do a test to see if there is electric tube damage to ensure that the entire converter temperature is good.
The use of oil furnace or gas furnace customers every year by the professional staff of the various types of motor to do a comprehensive inspection in order to detect problems in time, and the entire heat exchanger to do a full cleaning. The method comprises the following steps: removing the burner, injecting the inside of the heat exchanger with high pressure air, separating the coke deposited on the plate from the plate and blowing out the heat exchange room to ensure the cleaning inside the heat exchanger to prolong the service life.
First, the operation of the rotating oven must be trained and assessed by the staff through the operation.
Second, the preparation before running:
1, to confirm whether the power is normal;
2, to confirm the furnace without foreign body.
3, to confirm the smoke system is working properly.
Three, open, stop sequence:
1, start the first turn on the power, select the baking temperature and time, to warm up to be reached when the preheating temperature, open the door to the car into the furnace, close the door, select the baking time, press the start button, The oven starts to work;
2, stop the first time out of the furnace barbecue, turn off the system, into the sleep state, and then turn off the total power can be.
Fourth, safe use Note:
1, in use to guard against burns.
2, before and after the operation must be promptly clean up the residue and disinfection.
3, if found any unusual situation in the oven, please inform the project staff.

s